ERICSSON GGSN COMMANDS PDF

topics on Ericsson MKVI SGSNs with great details on HW, SW and Systems Configuration Overview Subscriber Commands Main KPIs AoB; 3. .. in use: gprs GGSN. THE ERICSSON SGSN-MME. -. Over a Decade of Erlang HSS. IP. Network. GGSN. SGSN. GSM: GSM+GPRS: W-CDMA: LTE: Ericsson+GGSN+and+SGSN+commands datasheet, cross reference, circuit and application notes in pdf format.

This helps to install the request information to the remote SPU for the next response packet.

SGSN Release 6 2. The client is allowed to request units before the previous grant is completely used, in order to avoid suspending the subscriber gbsn while talking to the server. For instance, a user may pay for both online time and download bytes but has only a single account balance.

If the output does not display the intended configuration, repeat the configuration instructions in this example to correct it. Before you begin, configure the required GGSN policy. SGSN Release 8 4. The response packet always sends to the request packet’s source address to the SPU. GPRS is often called as 2.

Before you begin, you should be familiar with GGSN pooling scenarios. Over view of 2.

Common Protocol Stacks Following are different protocol stacks for different interfaces. Interface Board for Single-Mode Fiber. You set the name of the match source address to ggsn-1 and the match destination address to sgsn Skip to main content.

Remember me on this computer. GPB is used for node management, processing and signaling. Internet protocols Internet Standards. If you are done configuring the device, enter commit from configuration mode.

The server can use the used-units count for debiting the subscriber balance granting units does not indicate that they will be used.

Session-based charging is typically used for scenarios where the charged units are continuously consumed, e. This can be resolved fricsson installing the request information on the correct SPU. The server grants units and erkcsson the user. Views Read Edit View history. Interface Board for SS7. It also performs authentication and charging functions. Next you set the GGSN policy name to ggsn-pool-g2s.

For price inquiries the client ask the server what the price for a unit is, and the server responds with the price. After the expected SPU number Hash 1. You set the action type to permit. GGSN is responsible for IP address assignment and is the default router for the connected user ericzson.

To quickly configure this example, copy the following commands, paste them into a text file, remove any line breaks, change any details necessary to match your network configuration, copy and paste the commands into the CLI at the [edit] hierarchy level, and then enter commit from configuration mode.

Diameter Credit-Control Application

As a workaround, you need to enable GTP inspection for the PDP context response message by configuring the custom policy and applications. When or before the subscriber session has used the granted units the client sends an update to the server telling it how many units have been used and how many commqnds would like granted this time.

In MKV, all boards are either of v3 or v4. Ericsso the packet will not be inspected by the GTP module.

Ericsson+GGSN+and+SGSN+commands datasheet & applicatoin notes – Datasheet Archive

The message flows are in general driven by the control-point asking for units and the server granting them. SGSN Release 7 3. It is also possible for the server to tell the client how long the grant is valid, in which case the client is expected to send an update when the grant timer expires. Finally, you set the default policy name to deny-all.

The server can use the termination message to clear any related reservations made in the back-end balance management system. You set the application protocol to gprs-gtp-v0. Event-based charging is typically used when units are not continuously consumed, e. To list down all parameters of configured values for different interfaces Ggzn, the subscriber has ended the command, and the client sends a termination message to the erkcsson containing the last Used-Units.

When GGSN receives data for a specific user, it checks whether that user is active or not.

In this example, you set security zones from zone ggsn and to zone sgsn. See the following examples:. Retrieved from ” https: By using this site, you agree to the Terms of Use and Privacy Policy.

GGSN Overview

Thus it means that GGSN is router to a sub-network. From Wikipedia, the free encyclopedia. In this example the server grants the client all the units it requested. Log In Sign Up. In scenario 2, the update request packet is dropped because of a lack of tunnel information.